Scottsdale Quality Painters applies elastomeric exterior coating in Scottsdale, AZ, to protect compatible stucco and masonry surfaces from weather exposure. These flexible coatings create a thicker protective film that stretches across minor surface cracks while maintaining a consistent exterior finish.
Arizona's intense sunlight and seasonal monsoon rains put exterior walls through changing conditions. A properly selected coating system gives vulnerable surfaces an added layer of protection without changing their architectural appearance.
What makes elastomeric coatings different?
• High-build acrylic membranes with flexible film properties
• Crack-bridging performance measured through ASTM C1305
• Dry-film thickness requirements for protective coverage
• Breathable formulations rated for water vapor transmission
• Airless spray equipment for controlled coating application
• UV-resistant color options for exposed masonry walls
Elastomeric paint isn't the answer for every exterior wall. Some surfaces need moisture corrections or a different coating system before treatment. Scottsdale Quality Painters checks the substrate and existing finish to determine if this type of protection makes sense for your property.
ROC Licensed | EPA Lead-Safe Certified | Free Color Consultations
Request a Free Quote
Tell us what needs painting and we'll get back to you the same day.

After several monsoon seasons, the painted block walls surrounding a hillside residence near Pinnacle Peak had developed fine surface cracks and uneven fading along the exposed western boundary. Rather than replacing the structurally sound masonry, the property owner considered a flexible coating system to improve rain resistance and restore a uniform appearance across the long perimeter walls. The proposed work involved checking drainage and moisture conditions, removing deteriorated paint, preparing compatible cracks and joints, and applying an acrylic elastomeric coating at the manufacturer's specified film thickness. A muted sandstone finish would blend with the nearby desert terrain while giving the exposed masonry additional protection against wind-driven rain.
Turnaround time: 7 days
Estimated price: $9,200
01
Not every masonry wall should receive a high-build elastomeric membrane. Existing moisture problems, previous coatings, and substrate movement all influence the choice. We assess these conditions before specifying the coating system.
The evaluation focuses on:
• ASTM D4263 plastic sheet testing for moisture indications
• Existing coating adhesion and compatibility checks
• Water vapor transmission ratings under ASTM E96
• Drainage, weep paths, and potential moisture entry points
02
A flexible coating needs a firm, properly prepared surface to maintain adhesion. Scottsdale Quality Painters examines deteriorated paint, surface contamination, and incompatible sealants before preparing the substrate for the new system.
Preparation requirements include:
• Removal of chalking and poorly bonded coatings
• Compatible elastomeric sealants at specified joints
• Surface profile assessment for coating adhesion
• Manufacturer-approved masonry primers where required
03
The selected coating must reach its specified thickness to perform as designed. Application rates depend on the product, masonry texture, and coverage requirements, so we check the manufacturer's technical data before setting the application sequence.
Technical application considerations:
• Airless spray tip sizes matched to coating viscosity
• Wet-film gauges for verifying application thickness
• Cross-directional passes to improve textured-wall coverage
• Surface temperature, humidity, and recoat limitations
04
The most vulnerable areas aren't always the largest wall sections. Corners, penetrations, and transitions deserve close attention because interruptions in the coating film may affect rain resistance. Scottsdale Quality Painters reviews the completed application before the final property walkthrough.
Inspection priorities include:
• Pinholes and thin spots around masonry joints
• Film continuity at wall-to-column transitions
• Dry-film thickness checks where measurement is practical
• Curing requirements before rain or surface washing
Scottsdale Quality Painters considers the existing wall condition before discussing elastomeric products. Some surfaces need better moisture management first. We explain why a particular coating system belongs on your property.
Elastomeric products depend on proper film buildup. Applying them too thinly reduces their intended protective performance. We consider manufacturer coverage requirements when planning the application.
Your exterior walls don't need a completely different appearance to receive a protective update. Existing architectural colors and textures guide the finish selection. The goal is improved surface performance with a look that belongs on the property.
Different elastomeric products have different performance ratings. Scottsdale Quality Painters discusses compatibility, coating requirements, and maintenance expectations. You'll understand the proposed materials before approving the work.
Elastomeric exterior coating application costs approximately $3 to $7 per square foot of coated wall area. A 2,000-square-foot wall project may cost $6,000 to $14,000 with standard preparation. Scottsdale Quality Painters can give you a more accurate quote after checking the property.
Yes, elastomeric coatings can stop rainwater from entering exterior walls. They protect compatible surfaces against wind-driven rain but cannot correct failed flashing or active leaks. Scottsdale Quality Painters can check these issues before recommending a coating.
No, elastomeric coating does not need a special primer in every application. Porous masonry and older painted surfaces may require additional priming. The manufacturer's specifications determine which primer to use.
Yes, elastomeric paint can be applied over existing exterior paint. The existing coating must have good adhesion and be compatible with the new product. Scottsdale Quality Painters can inspect peeling or deteriorated areas before application.
If elastomeric coating is applied too thinly, its crack-bridging and protective performance decreases. Thin spots also leave textured areas and masonry joints more vulnerable to moisture. Proper film thickness follows the coating manufacturer's application requirements.